Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterFurnace Replacement in Queens, NY
Furnace replacement in Queens typically costs between $4,200 and $8,900 for a standard single-family home, with most installations completed in one day. The final price depends on your home’s square footage, the efficiency rating you choose, and whether any ductwork modifications are needed. At Brandt HVAC Co Queens, every replacement starts with a written price before any work begins, so you’ll never get a surprise number after the fact.
We’re part of the home service family that’s been keeping Queens warm since 2003, and furnace replacement is one of the jobs our technicians handle most often between October and March. If your current system is limping along and you’re weighing repair against replacement, this page walks you through what actually matters: the signs it’s time, what a replacement involves, what it costs in Queens, and how we make the whole process predictable from the first phone call to the final walkthrough. You can reach us any time at (845) 328-4955, and a live person answers, day or night.
This service falls under our broader Heating & Furnace in Queens work, but replacement is its own animal. It’s not a patch job. It’s a full system swap, and doing it right means sizing the unit correctly, addressing airflow, and standing behind the result for a full year.
When You Need Furnace Replacement
Not every furnace problem means replacement. A bad igniter, a cracked pressure switch, or a worn blower motor are repairs we handle regularly, and a good one should buy you more time. But there’s a point where the math flips. Here’s what that looks like in real Queens homes:
- Your furnace is over 15 years old and the repair bill is climbing. Once a furnace crosses the 15-year mark, a major component failure like a heat exchanger crack often costs 40 – 60% of what a new system would. In Bayside and Forest Hills, where we see a lot of original equipment from the 1990s and early 2000s, this is the most common replacement trigger.
- Your heating bills keep rising while the house feels the same. An older furnace running at 70 – 80% efficiency wastes a lot of what you pay for. A new high-efficiency unit from Trane or Lennox can run at 95% or better, which shows up directly on your Con Edison bill during January and February.
- The flame is yellow, not blue, or you smell something off. A yellow or flickering flame can mean incomplete combustion. If you see this, shut the furnace down and call us. It’s a potential safety issue, and we’ll tell you honestly whether it’s repairable or whether you’re at the replacement point.
- Rooms heat unevenly no matter how you adjust the registers. This often means your furnace’s blower or heat exchanger can no longer distribute air the way the house needs. You can chase it with repairs, but an undersized or failing system will keep disappointing you.
- You’ve repaired the same component twice in three years. When the same part fails repeatedly, it’s usually a symptom of a system-wide problem. Throwing money at it isn’t a strategy.
- Your furnace is loud enough that you notice it. Banging, rattling, or a persistent hum that changes pitch isn’t normal. Some of those sounds indicate heat exchanger stress, which is exactly the kind of problem you don’t want to ignore.
One thing that surprises homeowners: sometimes the furnace is fine, and the problem is the thermostat, the ductwork, or the return air. We check the whole system before recommending replacement. If you don’t need a new furnace, we’ll tell you that plainly and show you what you do need.
Our Furnace Replacement Process
Here’s exactly how a replacement with Brandt HVAC Co Queens works, step by step:
- You call (845) 328-4955 and a live person answers. No phone tree, no voicemail, no “press 2 for service.” We take your information, ask about your home and your current furnace, and schedule a visit at a time that works for you. Nights and weekends included.
- You get a technician’s name and photo before we arrive. This is our Threshold Verified standard, and it’s non-negotiable. Every technician is background-checked and identity-verified. You’ll know who’s coming, what they look like, and when to expect them. When they arrive, they show a photo ID badge at the door. If someone shows up who you weren’t told to expect, the visit is on us.
- We inspect your current system and your home. A proper replacement quote requires looking at square footage, ceiling height, insulation quality, window count, duct condition, and the current furnace’s size and condition. We measure. We don’t guess. This is how we avoid installing a unit that’s too big or too small, both of which cost you money for years.
- You get a written price before any work starts. This is a fixed number for the full replacement: the furnace, the labor, the removal of your old unit, any duct adapters, the thermostat if needed, and the permit work. Nothing starts until you’ve seen it and approved it in writing. No exceptions, ever.
- We install your new furnace, usually in one day. Our crew arrives, protects your floors, removes the old unit, installs the new one, tests it, and walks you through how to use it. We clean up. You shouldn’t be able to tell we were there except that the house is warm.
- You get a written guarantee, and we stand behind it for 365 days. Every replacement carries our 365-Day Done Right Promise. If something isn’t right within that year, we come back and make it right at no charge. No argument, no fine print, no “that’s technically not covered.” It’s covered.
Furnace Replacement Pricing in Queens
Here’s what furnace replacement actually costs in Queens, based on the work we do across neighborhoods like Astoria, Flushing, Jamaica, and the Rockaways:
- Standard-efficiency furnace replacement (80% AFUE): $4,200 – $5,800 for a typical 1,500 – 2,000 sq ft home. This is the most common choice for budget-conscious replacements in older Queens homes with existing venting.
- High-efficiency furnace replacement (92 – 96% AFUE): $5,500 – $8,900. These units, including models from Trane, Lennox, and Goodman, qualify for utility rebates in many cases and cut heating costs noticeably. They require updated venting, which is part of the install.
- Two-stage or variable-speed furnace replacement: $6,800 – $11,000+. These provide the most even, quiet heat. They’re a good fit for larger homes in areas like Forest Hills Gardens or Douglaston with multiple zones and high ceilings.
- Heat pump or dual-fuel replacement (furnace plus heat pump): $8,500 – $14,500. More common in Queens homes without gas service or where homeowners want air conditioning and heating in one efficient package.
What moves the price? The size of your home, the efficiency tier, the condition of your ductwork, whether the old flue needs relining, and whether you’re upgrading your thermostat. A Rheem 80% unit in a compact Kew Gardens apartment costs far less than a variable-speed Lennox in a sprawling Bayside colonial, and both are legitimate options. The point is that you’ll know your number before we start, and it won’t change.
Call (845) 328-4955 for a free estimate. We’ll give you a real number based on your actual house, not a generic range from a website.
FAQs – Furnace Replacement
Is it cheaper to repair or replace my furnace in Queens?
If your furnace is under 12 years old and the repair costs less than a third of a replacement, repair usually makes sense. Once you’re past 15 years old, or the repair bill hits $2,000+, replacement is almost always the better long-term move. We’ll give you an honest recommendation either way, because we’d rather tell you a repair will do the job than sell you a furnace you don’t need. Call (845) 328-4955 and we’ll assess it for you.
How much does furnace replacement cost in Queens?
Most furnace replacements in Queens run between $4,200 and $8,900, with high-efficiency and dual-fuel systems running higher depending on home size and ductwork condition. Your written quote from Brandt HVAC Co Queens covers everything: equipment, labor, removal, and permit work. Call (845) 328-4955 for an exact quote, and the number you see is the number you pay.
Can you replace a furnace the same day?
In most cases, yes, if we have the right unit in stock or can bring it in that morning. Emergency replacements in January are something we handle regularly. Call (845) 328-4955 as early as you can, and we’ll tell you honestly whether same-day is realistic for your situation.
What brand of furnace should I choose?
Trane and Lennox are strong choices for high-efficiency, long-warranty systems. Goodman and Rheem offer solid reliability at a lower price point. We service and install all of them, and we’ll recommend based on your budget, your home’s size, and how long you plan to stay in the house, not on which brand gives us the best margin. Your written quote will name the exact model, so you can look it up before you decide.
What does the warranty cover on a new furnace?
Your manufacturer’s warranty covers parts, typically 10 years for the heat exchanger and 5 – 10 years for other components if you register the unit. Our 365-Day Done Right Promise covers the installation itself for a full year. If anything we installed fails or was installed incorrectly, we fix it at no charge. You’ll get both warranties in writing.
Written by Devin Marlowe, Owner at Brandt HVAC Co Queens, serving Queens.